10
PEM-X1
OPERATING MANUAL
VERSION 03/2014 ORDER NUMBER DOC 2326020
2.6 REASONABLY FORESEEABLE MISUSE
2.7 RESIDUAL RISKS
Residual risks are risks which cannot be excluded even in the event of correct use.
If necessary, warning and prohibition signs at the relevant points of risk indicate residual
risks.
The following is prohibited:
coating work pieces which are not grounded,
unauthorized conversions and modi cations to the spray gun,
processing liquid or similar coating products,
using defective components, spare parts, or accessories other than those described in
Chapter 12 of this operating manual.
The forms of misuse listed below may result in physical injury or property damage:
Use of damp powder lacquer
Incorrectly set values for powder discharge
Incorrectly set electrostatic values
Use of defective components and accessories
Use for foodstu s
Use in the pharmaceutical sector
Use with non-authorized control units
Residual risk Source Consequences Speci c measures Lifecycle phase
Skin contact with
powder lacquers
and cleaning agents
Handling powder
lacquers and
cleaning agents
Skin irritation,
allergies
Wear protective
clothing,
Operation,
observe safety data
sheets
maintenance,
disassembly
Powder lacquer
in air outside the
de ned working
area
Lacquering outside
the de ned working
area
Inhalation of
substances
hazardous to health
Observe working
and operating
instructions
Operation,
maintenance
To Next Page
Loading...
Need help?
General
