Warmup WT01 - Heating Schedule; Heating Schedule 1;2

PAGE 15
© 2014 OJ Electronics A/S
Heating Schedule 1/2
The heating schedule allows you to control temperature automatically according
to a programmed schedule of your choice. The thermostat comes with a pre-
programmed event schedule for easy and economic heating control, see Preset
Schedule under Factory Settings. The heating schedule can easily be changed in
the following way:
1. Tap the “Menu” button on the home screen. Then tap the “Heating Schedule”
button to access schedule options.
2. Tap the “Week Schedule” button.
3. Choose between “Work days/home days” and “All days are dierent”. “Work
days/home days” is best if you have fixed working hours.
4. If you chose “Work days/home days”, tap the “Right Arrow” button to access
information about the schedule and then select the days on which you work.
Once you have selected your work days, tap the “Right Arrow” button and the
thermostat will automatically designate the remaining days as home days. Tap
the “√” button to accept. Tap the “LeftArrow” button to return to the “Heating
Schedule” menu. Now proceed to step 7.
5. If you chose “All days are dierent”, each day of the week must be individually
programmed, giving you complete control of every single event.
6. Tap the “LeftArrow” button on the “Your Week Type” screen to exit.
7. Tap the “Event Schedule” button to set up the target/setpoint temperature and
start time for each event.
8. Tap the temperature if you want to change it, then tap the “Up Arrow” or “Down
Arrow” button to set the required temperature.