PAGE 38
© 2014 OJ Electronics A/S
Adaptive Function
Select “ON” if you want the room to be warmed up before the beginning of an event.
After just a few days, the adaptive function will have automatically calculated how
much earlier the heating must be turned on to achieve this.
Select “OFF” if you just want the heating to start at the beginning of an event.
1. Tap the “Menu” button on the home screen.
Scroll down and tap the “Engineer Settings” button.
2. Tap the “Adaptive Function” button.
3. Tap the “OFF/ON” button to the setting you prefer and confirm with the “√”
button.
4. The thermostat will automatically return to “Engineer Settings”.
To Next Page
Loading...
