PAGE 40
© 2014 OJ Electronics A/S
Startup Wizard
When the thermostat is powered up for the first time, or after a “Factory Reset” has
been performed, the “Startup Wizard” will appear on the screen.
This allows you to enter the basic data required by the thermostat in order to operate.
1. Language – set the language to be used in the thermostat display. Tap the “Up
Arrow” or “Down Arrow” button to scroll up and down.
Tap the language you prefer.
Confirm with “OK”.
2. Date – set the current date (is used for several functions).
Tap the parameter you want to change.
Tap the “Up Arrow” or “Down Arrow” button to set the day, month and year.
Confirm each setting with “OK”.
3. Time – set the current time (is used to control the “Heating Schedule”).
Tap the parameter you want to change.
Use the “Up Arrow” or “Down Arrow” to set the hours and minutes.
Confirm each setting with “OK”.
4. Floor Type – choose between:
5. Tile: floors made of tile or stone.
6. Soft Floor: wooden or other engineered floors.
7. Confirm your choice with “√” or discard it with “X”.
To Next Page
Loading...
