PAGE 5
© 2014 OJ Electronics A/S
First-time Settings – Startup Wizard
When the system has been installed and turned on for the first time, or after you
have performed a factory reset, you must set Language, Date, Time and Floor Type.
The thermostat will automatically guide you through the process.
1. Language – set the language to be used in the thermostat display.
Tap the language you prefer. Confirm with “OK”.
2. Date – set the current date, which is used for several functions.
Tap the parameter you want to change. Use the “Up Arrow” or “Down Arrow”
button to set the day, month and year.
Confirm each setting with “OK”.
3. Time – set the current time, which is used to control the “Heating Schedule”.
Tap the parameter you want to change. Use the “Up Arrow” or “Down Arrow”
button to set the hours and minutes.
Confirm each setting with “OK”.
4. Floor Type – choose between:
Tile: floors made of tile or stone.
Soft Floor: wooden or other engineered floors.
Confirm your choice with “√” or discard it with “X”.
The thermostat is now ready for use and will control the underfloor heating
according to the preset heating schedule. If you want to change the heating
schedule, please refer to the section titled Heating Schedule.
Please refer to Factory Settings for details of the pre-set heating schedule.
To Next Page
Loading...
