WAVECONTROL SMP3 - Page 90

User’s Manual Electromagnetic Field Meter SMP3 P. 87
Commands and responses
Instruction
Parameters
Response
GET_SAMPLE
get the field
measured
field_type: 0 electric, 1 magnetic
value: field in V/m or uT
unit: units displayed on the screen (see
“Units” section)
x, y, z: field in axis
avg: average field
peak: peak value of WP400 probe
gps_lat_deg: latitude in decimal degrees
gps_lon_deg: longitude in decimal degrees
gps_height: height in meters
GET_TIME
get time
local_time: time in format YYYY-MM-DD
HH:mm:ss
SET_TIME
set time
new_date_time:
time in format
YYYY-MM-DD
HH:mm:ss
local_time: time in format YYYY-MM-DD
HH:mm:ss
INFO_SYSTEM
get info about
device
device: identify device SMP3
serial_micro: unique ID of micro crontoler
firmware_version: firmware version
serial_device: device serial number
hardware_version: hardware version
MEASURE_START
start measurement
MEASURE_STOP
stop measurement
SET_DATA_TYPE
to select time
or frequency
measurement
mode
data: time or freq
data: time or freq