WAVECONTROL SMP3 - Page 91

User’s Manual Electromagnetic Field Meter SMP3 P. 88
KEY
take a screenshot
key:
PRINTSCREEN
BATTERY_INFO
get battery level
capacity_mAh: capacity in mA/h
charge_mAh: current charge in mA/h
GET_FFT
(SET_DATA_TYPE
has to be in FFT
mode first)
Units
Below it is described in c# the units of SMP3 with the identification number that
the command GET_SAMPLE returns.
typedef enum
{
E_FIELD_V_m
= 0,
/* E - V/m */
E_FIELD_kV_m
= 1,
/* E - kV/m */
E_FIELD_uW_cm2
= 2,
/* E - uW/cm2 */
E_FIELD_mW_cm2
= 3,
/* E - mW/cm2 */
E_FIELD_W_m2
= 4,
/* E - W/m2 */
E_FIELD_A_m
= 5,
/* E - A/m */
E_FIELD_STRENGTH_PERCENT
= 6,
/* E - % */
E_FIELD_S_PERCENT
= 15,
/* E - S% */
} E_FieldUnit;
typedef enum
{
H_FIELD_A_m
= 7,
/* H - A/m
*/
H_FIELD_uT
= 8,
/* B - uT
*/
H_FIELD_nT
= 9,
/* B - nT
*/
H_FIELD_mT
= 10,
/* B - mT
*/
H_FIELD_T
= 11,
/* B - T
*/
H_FIELD_STRENGTH_PERCENT
= 12,
/* H - %
*/
H_FIELD_mG
= 13,
/* B - mG
*/
H_FIELD_G
= 14,
/* B - G
*/
H_FIELD_S_PERCENT
= 16,
/* H - S%
*/
} H_FieldUnit;