Unboxing and Dismounting
Estimated Time: 30 minutes
Requires two people
WAZER Pro arrives in a Crate. Within this crate you will find a variety of other boxes. These boxes
will contain all the components needed to run WAZER Pro.
Before attempting to uncrate WAZER, please be sure to have:
• Two people capable of lifting 60lbs (27kg) each
• T20 Torx screwdriver
• Pallet Jack (Standard size)
• Slotted Screw Driver, Pliers and hammer
• Gloves.
1
2
3
WAZER PRO will be arriving in a tall crate. One of the side crate panel will be used as a ramp to
dismount the WAZER Pro. The first step of unpacking is to make sure you have at least 15 feet
(4.5m) of free space, and align the pallet with the tamp piece facing the open space.
WAZER Pro and its accrssories will arrive
in a tall crate weighing more than 550lbs
(250kg)
The metal tabs are very sharp and can cause serious slash wounds. Gloves are
recommended in this step
Use a pair of pliers or prying tool to pry
open the metal tabs
28
To Next Page
Loading...