Select Sensor, Motion Detection, Video Loss, Text or System for
activating event.
System event sources of HDD Fail, fan fail, password fail, WRS
registration fail, power on and recording fail can be checked
(some or all).
HDD Fail
Event notification for HDD performance problems or connection
status problems.
HDD Almost Full
Event notification when data stored in HDD is larger than the set
value. It is activated when “HDD Fail” is checked.
Password Fail
Event notification when login password is incorrect.
WRS Registration Fail
Event notification when WRS registration is failed.
Power On
Relay will be operated during set action time when NVR is power
on.
Recording Fail
If recording is not working normally, popup window pops up
with buzzer. Until HDD is recovered, popup window will pop up
with buzzer every 10 minutes after user click ‘Ok’.
After HDD is recovered, pop up will not appeared.
To Next Page
Loading...