WEG MVW3000 - Page 172

5
DETAILED PARAMETER DESCRIPTION
Description:
Refer to P0234 (Analog input AI1 gain (unipolar MVC4 board)).
P0725 - Minimum coasting time
Adjustable range: 0 to 300 s Factory setting: 0 s
Acesso: Menu → Configurations → Control
Description:
The minimum coasting time determines for how long the inverter will not be accepting the General Enable or
Start/Stop command after a coasting stop (P0232 = 1 (General disable)).
By programming 0 at this parameter the function is deactivated.
P0740 - Function of analog input AI1 MVC3
Adjustable range: 0 to 2 Factory setting: 0
Acesso: Menu → Configurations → I/O → Analog inputs
Description:
It defines the function of the AI1 analog input of the MVC3 board.
Table 5.71: Function of analog input AI1 MVC3
P0740 Function
0
Not Used
1
Torque reference
2
Limit current
P0741 - Analog input AI1 gain (bipolar MVC3 board)
Adjustable range: 0.000 to 9.999 Factory setting: 1.000
Acesso: Menu → Configurations → I/O → Analog inputs
Description:
It sets the gain of analog input AI1 of the MVC3 board.
Refer to P0234 (Analog input AI1 gain (unipolar MVC4 board)).
P0742 - Analog input AI1 offset (bipolar MVC3 board)
Adjustable range: -100.0 to 100.0 % Factory setting: 0.0 %
Acesso: Menu → Configurations → I/O → Analog inputs
Description:
It sets the offset of analog input AI1 of the MVC3 board.
Refer to P0234 (Analog input AI1 gain (unipolar MVC4 board)).
P0744 - Function of analog input AI2 MVC3
Adjustable range: 0 to 1 Factory setting: 0
Acesso: Menu → Configurations → I/O → Analog inputs
MVW3000 | 5-96