Safety Instructions
PLC300 | 1-1
1 SAFETY INSTRUCTIONS
This manual contains the information for the correct use of the programmable controller
PLC300.
It was developed to be used by people with proper technical training or qualification to
operate this kind of equipment.
1.1 SAFETY WARNINGS IN THIS MANUAL
In this manual, the following safety warnings are used:
DANGER!
The procedures recommended in this warning have the purpose of protecting
the user against death, serious injuries and considerable material damages.
ATTENTION!
The procedures recommended in this warning have the purpose of avoiding
material damages.
NOTE!
The information mentioned in this warning is important for the proper
understanding and good operation of the product.
1.2 SAFETY WARNINGS IN THE PRODUCT
The following symbols are attached to the product, serving as safety notices:
High voltages are present.
Components sensitive to electrostatic discharge.
Do not touch them.
Mandatory connection to the protective earth (PE).
To Next Page
Loading...
Need help?
General
