1-2 | PLC300
1.3 PRELIMINARY RECOMMENDATIONS
DANGER!
Only qualified personnel, familiar with PLC300 and related equipment must
plan or perform the installation, commissioning, operation and maintenance
of this equipment.
The personnel must follow the safety instructions described in this manual
and/or defined by local standards.
The noncompliance with the safety instructions may result in death risk
and/or equipment damage.
NOTE!
For the purposes of this manual, qualified personnel are those trained in
order to be able to:
1. Install, ground, power up and operate the PLC300 in accordance with
this manual and the safety legal procedures in force.
2. Use the protective equipment in accordance with the standards.
3. Give first aid.
DANGER!
Always disconnect the general power supply before touching any electrical
device associated to the PLC.
ATTENTION!
The electronic cards have component parts sensitive to electrostatic
discharge. Do not touch directly the component parts or connectors.
NOTE!
Fully read this manual before installing or operating this equipment.
To Next Page
Loading...
Need help?
General
