上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
116 / 144
6.2 Wiring Diagram of Terminal Board
In this section, you can quickly know about how to connect I/O ports of each
terminal board.
According to the configuration, wiring diagram of terminal board can be divided
into the following:
• Wiring diagram of terminal board (in sheet cutting configuration)
• Wiring diagram of terminal board (in tube cutting configuration)
Terminal board differs in follow-up control mode:
• In position loop control mode, the terminal board is EX30A terminal board.
• In velocity loop control mode, the terminal board is EX33A terminal board.
To enable exchanging workbench function, EX31A terminal board must be added.
6.2.1 Wiring Diagram of Terminal Board (in Sheet Cutting Configuration)
In sheet cutting configuration, wiring diagram of terminal board includes the
following:
• Wiring diagram of Lambda 5E terminal board
• Wiring diagram of EX30A terminal board
• Wiring diagram of EX33A terminal board
• Wiring diagram of EX31A terminal board
To Next Page
Loading...
