WEIHONG NcEditor V12 - 5 List of System Parameters; Basic Parameters

上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
84 / 144
5 List of System Parameters
This section introduces all parameters under System → System Parameters menu
in NcEditor V12 Laser Cutting CNC System, including:
• Basic parameters
• Speed and accuracy parameters
• External device parameters
• Advanced function parameters
5.1 Basic Parameters
This section introduces basic parameters of the machine tool under Basic Param
category, including the following:
• 1.0 Axis Parameters
– 1.0.0 X-axis
– 1.0.1 Y-axis
– 1.0.2 Z-axis
– 1.0.3 B-axis
• 1.1 Homing
– 1.1.0 General Parameters
– 1.1.1 Origin Setting (X)
– 1.1.2 Origin Setting (Y)
– 1.1.3 Origin Setting (Z)
– 1.1.4 Origin Setting (B)
• 1.2 Error Compensation Setting
• 1.3 Double Y Error Setting
5.1.1 X-axis
Moving Distance Per Revolution of Motor
Moving diatance per revolution of motor on load axis.
Range: (0, 200]mm
Default value: 100
Pulse Equivalent
Displacement or angle caused by per pulse in X-axis.
Range: [1E-08, 1000]mm/p
Default value: 0.002