上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
10 / 144
1.3.2 Manually Install Driver
After installing NcEditor software and motion control card, if the software cannot be
opened and one of the following dialog boxes pops up, it indicates that the system
may fail to automatically install driver. After eliminating problems such as the
motion control card loosens, you can manually install driver to solve the problem.
Taking Windows 7 as an example, to manually install driver, do the following:
1. Open Device Manager and do one of the following:
– If it is your first time to update the driver:
To Next Page
Loading...
