Need help?Do you have a question about the Weiler E1250 and is the answer not in the manual?
Overview of manual purpose, structure, and general operating advice.
Details the Weiler E1250 elevator, its engine, drive system, tires, augers, conveyor, and operator stations.
Identifies key components of the E1250 elevator using numbered labels on a diagram.
Covers operator station location, features, and all controls including ground drive, engine, elevator, conveyor, remix, and accessory controls.
Details location, features, and controls for the dump hopper operator.
Explains location, features, and controls for conveyor cleanout and service.
Identifies circuit breaker panels, cold start breaker, main breaker panel, and hour meter.
Details engine components like oil dipstick, filters, alternator, starter, turbo, and air filter.
Explains clutch, pump drive, ground drive pumps, motors, planetaries, valves, cylinders, pumps, and filters.
Covers shipping, loading, unloading, tie-down, and towing procedures for the machine.
Introduces operational procedures and emphasizes the importance of pre-start checks.
Details the critical pre-operation inspection checklist for safety and machine integrity.
Provides detailed steps and safety warnings for starting the machine's engine.
Explains how to safely operate and drive the Weiler E1250 elevator.
Guides the operator through the process of loading material and preparing for paving.
Provides procedures for clearing material from a stalled elevator, conveyor, or remix hopper.
Details the correct steps for safely shutting down the machine at the end of operation.
Explains how to wash down and lubricate the machine after use.
Provides essential safety warnings and general guidelines before performing maintenance.
Outlines maintenance schedules and provides a detailed lubrication chart for the E1250.
Details the procedure for adjusting the tension of the elevator and conveyor chains.
Lists required hydraulic pressures for various pumps and systems on the machine.
Covers battery charging procedures, alternate methods, and safe welding practices.
Lists essential checks and tasks for dealers before delivering the machine.
Details checks for operator, dump hopper, and conveyor control stations for proper function.
Presents diagrams of the hydraulic system for elevator, conveyor, ground drive, and pumps.
Displays wiring diagrams for engine, ground drive, elevator, conveyor, and auxiliary functions.
To Next Page
General