Main Operator Control Station- Check Operation of the following:
Engine Controls
____ Ignition switch
____ Engine speed switch
____ Engine tachometer
____ Engine oil pressure gauge
____ Engine water temperature gauge
____ Volt meter
____ Fuel level gauge
____ Stop switch
____ Horn
Ground Drive Operation.
____ Low motor speed.
____ Low creep speed.
____ High motor speed.
____High motor speed indicator light
____ High creep speed.
____ Ground drive speed dial
____ Park brake
____Park brake indicator light.
____ Differential lock switch
Elevator/ Remix Hopper Operation
____ Elevator/ remix hopper on/off switch
____ Elevator speed control dial
____ Elevator reverse switch
____ Elevator maximum speed switch
____ Remix hopper switch (optional)
____Forward
____Reverse
Conveyor Operation
_____ Conveyor on/off switch
_____ Conveyor raise/lower switch
_____ Conveyor swing switch
Hopper Controls (Truck Unloading)
_____ Elevator raise/lower
_____ Hopper baffle switch
_____ Hopper dump switch
_____ Hopper vibrator switch
_____ Push roller adjustment switch
_____ Truck hitch switch (optional)
To Next Page
Loading...