PROCEDURE
1 Make sure that there is no alarm indication.
2 Prepare the control system for operation.
2.1 Set to ON the engine control system (ECS) and the remote control system (RCS).
2.2 Set to ON all circuit breakers in the power supply box E85.
2.3 Set to ON the control box for the cylinder oil filter (refer to the documentation of
the manufacturer).
X92-B
AA00-0000-00AAA-121A-A
Operation Manual Prepare the engine before start
Winterthur Gas & Diesel Ltd.
- 247 - Issue 002 2021-11
To Next Page
Loading...
