WinGD X92-B - Allowed Load During Cylinder Cut out

•
The bearings
•
The temporarily secured parts
•
The oil flow through bearings
•
The tightness of blanked-off openings
15 After 60 minutes of running, open the crankcase and check:
•
The bearings
•
The temporarily secured parts
•
The oil flow through bearings
•
The tightness of blanked-off openings
The cylinder is now cut out and the engine performs under special running conditions.
Fig 10-24 Allowed load during cylinder cut out
X92-B
AA00-0000-00AAA-100A-A
Operation Manual Special running condition: Cylinder cut out
Winterthur Gas & Diesel Ltd.
- 414 - Issue 002 2021-11