•
Remote control.
8.10 Make sure that the supply of starting air to the starting air supply pipe is possible:
8.10.1 Close the two drain valves in the starting air supply pipe.
8.10.2 Connect the plugs on the two solenoid valves CV7013C and CV7014C.
8.11 Disengage the turning gear.
NOTE: On each control panel, the indication changes to Turning Gear
Disengaged. The start command is canceled in the remote control.
9 If there is a malfunction, find the cause and repair the fault, before you start the engine.
CLOSE UP
• None
X92-B
AA00-0000-00AAA-340A-A
Operation Manual Do regular safety checks
Winterthur Gas & Diesel Ltd.
- 267 - Issue 002 2021-11
To Next Page
Loading...
