10.15 Fuel pump - cutting out
Periodicity
Description
Unscheduled
Duration for performing preliminary requirements 0.0 man-hours
Duration for performing the procedure 1.0 man-hours
Duration for performing the requirements after job completion 0.0 man-hours
Personnel
Description Specialization QTY
Engine crew Basic 1
Support equipment
Description Part No. CSN QTY
Flange 94569 1
Flange 94569A 1
Roller lifting tool 94430 1
Pre-tensioner 94430A 1
Supplies
Description QTY
None
Spare Parts
Description Part No. CSN QTY
None
SAFETY PRECAUTIONS
WARNING
Injury hazard: The cutting out procedure can only be done when the engine is stop.
WARNING
Injury hazard: Before you operate the turning gear, make sure that no personnel are near
the flywheel or the engine.
CAUTION
Damage hazard: When the fuel pump is unserviceable, repair the fault immediately. If the
fault cannot be repaired, because the engine must operate, it becomes necessary to cut
out the unserviceable fuel pump. This will prevent damage hazard.
X92-B
AA00-5556-00AAB-510B-A
Operation Manual Fuel pump - cutting out
Winterthur Gas & Diesel Ltd.
- 370 - Issue 002 2021-11
To Next Page
Loading...
