504474484
7
EN
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
blueMatic EAV Installation, Operating and
Maintenance Instructions
T-SET KÜ-T1 FT INTEG-EAV 1 + 3 M
Plug'n'play solution for fingerprint ekey home integra (sash side)
Sash part: KÜ-T1 FT INTEG EAV 1+3M
Cable at the sash side 1 m (6 x 0.25 mm),
Cable ends with 8-pole plug for control unit
ekey home integra
Accessories/included in the set:
• ANSCHLUSSKABEL 3M FÜR MOTOR
3-ADRIG (3 x 0.25 mm)
- 1st Cable end with plug for motor housing EAV
- 2nd Cable end with wire end sleeve
Max. voltage: 48 V DC
Max. switching current: 2 A per connection line/wire
T-SET KÜ-T1 FT ZK-EAV 3,5 + Y 0,5 M
(alternatively T-SET KÜ-T1 FT ZK-EAV 1,5 M + Y0,5 M)
Plug'n'play solution for fingerprint IDENCOM BioKey INSIDE or ekey home SE
micro (sash side)
Sash part: • KÜ-T1 ZK-FT EAV FT 3,5 m
Cable at the sash side 3.5 m (5 x 0.25 mm),
• alternatively KÜ-T1 ZK-FT EAV FT 1,5 m
Cable at the sash side 1.5 m (5 x 0.25 mm),
e.g. for timber entrance doors
Cable ends each with 5-pole plug for
connection with Y-cable
Accessories/included in the set:
• Y-CABLE ZK FLÜGEL-EAV 0.5 m (0.25 mm)
- 1st Cable end with plug for motor housing EAV
- 2nd Cable end with plug for cable transition
KÜ-T1 ZK-FT EAV FT
- 3rd Cable end with plug for sash side access
control systems
Max. voltage: 48 V DC
Max. switching current: 2 A per connection line/wire
To Next Page
Loading...
