Need help?Do you have a question about the Winter 21 Series and is the answer not in the manual?
General| Brand | Winter |
|---|---|
| Model | 21 Series |
| Category | Water Pump |
| Language | English |
Basic guidelines for the manual and pump operation.
Manual is for technically skilled and trained personnel.
Lists related documents like datasheets and drawings.
Details required for pump inquiries and orders.
Explanation of symbols used in the manual.
Identifies different hazard symbols and their meanings.
General guidelines for safe pump operation and preventing injury.
Specifies approved operating conditions and media for the pump.
Lists common improper uses and their risks.
Requirements for personnel operating, maintaining, or installing the pump.
Risks and liabilities from not following manual instructions.
General safety regulations to be complied with.
Safety advice for pump operators and users.
Safety guidelines for maintenance and installation work.
Prohibits operation outside specified limits.
Notes on EMC compliance when using frequency converters.
Restrictions on modifications and use of spare parts.
Instructions for inspecting goods upon delivery.
Guidelines for safe transportation and handling of pumps.
Recommendations for storing pumps to prevent damage.
Procedures for returning pumps.
Instructions for safely dismantling and disposing of pumps.
Overview of Series 21 centrifugal pumps and testing standards.
Specifies typical and prohibited uses for the pumps.
Information on different pump connection configurations.
Detailed dimensions for various pump models.
Part numbering system for materials used in pump construction.
Summary of available materials for pump components.
How to read and understand the pump's name plate.
Details on different pump designs (M, IM, TM).
Explanation of how the centrifugal pump works hydraulically.
Requirements for the pump's installation location.
Guidance on installing protective covers for vertical installations.
Information on opening drainage holes for motors in certain conditions.
Notes on sound pressure levels and their dependence on connected lines.
Where to find dimensional and weight information.
General safety advice for installation and assembly.
Verifying serial number and checking for transport damage.
Instructions for installing and assembling the pump unit.
Guidelines for connecting pipelines to the pump.
Installation practices to minimize vibrations and noise.
Mechanical and electrical protective devices for safe operation.
Instructions for safely connecting the pump to the power supply.
Verifying pump rotation direction after installation.
Necessary preparations before starting the pump.
Details on motor storage and lubrication.
Step-by-step process for commissioning the pump set.
Guidelines for machine operation, including pressure and flow limits.
Procedures for safely shutting down and draining the pump.
Instructions for restarting the pump after a period of inactivity.
Safety rules for maintenance and service tasks.
Information on lubricants, filling, and consumption.
Procedures for replacing seals and shaft seals.
Steps for disassembling and reassembling pump components.
Guidance on stocking spare parts for a 2-year period.
Identifies causes and solutions for flow-related issues.
Identifies causes and solutions for mechanical problems.
Identifies causes and solutions for electrical faults.
Where to find detailed specifications for individual parts.
Table of recommended screw tightening torques.
Supplemental sheet for handling and installation.
Reference to sectional and part drawings for pump variants.
Manufacturer's declaration of compliance with EU directives.
To Next Page
