7.1.2 Switching on
Touch the screen surface with your fingertips.
Screen 01 appears.
Press the button (1) for about 2 seconds until the next screen menu
appears.
The tanks of the machine are automatically filled and heated at
the same time.
Detergent is dosed into the last washing tank (assuming dosing
equipment is connected). Detergent is dosed into the washing
tanks upstream of this one during ongoing operation.
Once the rated level has been reached in all tanks, the
animated temperature symbol appears on the screen until the
rated temperatures have been reached.
The temperature symbol disappears as soon as the rated
temperatures have been reached. The machine is ready
(screen 03).
INFO: The machine is supplied from the factory programmed so that it
can be started as soon as the rated level in the tanks is reached.
If you are working according to HACCP directives, the Winterhalter
service technician can program the machine so the operating
personnel cannot start it until the rated temperatures have also been
reached.
7.2 Washing with the standard programmes
The machine can be operated with three different transport speeds.
Intensive programme;
Transport at slow speed
For heavily soiled dishes
Normal programme;
Transport at medium speed
For normally soiled dishes
Rapid programme;
Transport at high speed
For lightly soiled dishes
The normal programme and the intensive programme ensure the contact time between the dishes and the
tank water of at least 2 minutes as required by DIN 10510.
The rack capacity or plate capacity per hour depends on the machine model.
To Next Page
Loading...
Need help?
General
