7.3.4 Example: Washing in the glasswashing programme and rinsing with osmosis water (can be
switched on)
Touch button (9). Result
Button (9) is active
Button (10) is active. Rinsing is done with osmosis
water.
Button (5) is available; buttons (3) and (4) are blocked
Touch button (10) if you do not want rinsing to be performed with osmosis water
Button (10) is dark.
Touch button (5).
The conveyor belt or the rack conveyor transport runs at slow speed.
Sort the glasses into suitable washing racks.
Place the washing racks onto the conveyor belt or push the washing racks into the machine.
Touch button (3) or (4) if you want to wash at a higher transport speed.
Remove the washing racks at the end of the unloading zone or the outfeed table.
To Next Page
Loading...
Need help?
General
