7.4 Routine checks
Touch the button to call up the INFO menu ( 12).
INFO: The display depends on the size of the actual machine
The screen shows the following information in symbolic form:
(11) The tanks with the current temperatures
(12) Rinsing with the current temperatures for lines 1 and 2
INFO: Only one temperature is displayed for machines with reduced rinse or for steam-heated
machines, as the temperatures is identical for both rinse lines.
(13) Working direction of the machine
Fault messages (if installed)
Events (e.g. Machine ON, Machine OFF, Ready, Start >, Start >>, Start >>; STOP, etc.)
Tell the Winterhalter service technician about the fault messages.
Check the displayed values with the temperatures specified by DIN 10510. ( 17.1).
When using chemicals, comply with the safety notes and dosage recommendations printed on
the packaging.
Wear protective clothing, protective gloves and protective goggles when handling chemicals.
Do not mix different detergent products together.
Check whether there is detergent or rinse aid in the storage tanks (drum or container). Top them up in
good time or renew the storage tanks so that the washing result will not be impaired.
Check that the crockery is cleaned.
Put on protective clothing and protective gloves before holding parts that are covered with tank
water (filters, washing arms, curtains, etc.).
Open the doors and clean the strainers if they are excessively contaminated. There is no need to drain
the water in order to do this.
Reinsert the strainers.
Clean the interior of the machine if it is excessively contaminated.
Close the doors.
Drain the tank in the first zone if it is excessively contaminated ( 7.5).
To Next Page
Loading...
Need help?
General
