13.5 General settings
13.5.1 Date, time, °Celsius / °Fahrenheit
INFO: The time must be changed in response to the summertime / wintertime time changes.
Here, you can:
Enter the current date.
Enter the current time.
Change the time format.
Change the unit of measurement for the temperature display.
How to call up the settings:
Access the PIN menu: PIN 1575
Touch the button.
Touch the button.
Setting the date:
Touch button (23).
Enter the current date using the numeric keypad.
Format: YYYY-MM-DD (year-month-day)
The system checks to make sure you have entered a valid date.
Your entry will not be accepted if it is implausible.
Enter the time format:
Select whether the time should be displayed in 24-hour or AM/PM
mode.
Touch the “24h” or “AM/PM” button.
Setting the time:
Touch button (24).
Enter the current time using the numeric keypad.
Defining the unit of measurement for temperature:
Touch the “°C” or “°F” button depending on which unit of
measurement you want to use for displaying temperatures.
Touch the back button (13) to exit this area.