7.5 Water change in zone 1
If the tank in the first zone is very heavily contaminated, it can be drained separately from the other tanks
and refilled.
Screen 03 Screen 05
Touch button (7).
This stops the drive.
Screen 05 appears.
Touch button (8).
The tank of the first zone is drained, refilled and heated up.
Touch button (8) again if you want to interrupt the procedure.
INFO: For larger machines, the Winterhalter service technician can alter the programming if requested so
that several tanks can be drained.
7.6 Switching off the machine
Press the on/off button (1).
The screen goes dark and the machine is switched off. The tanks remain filled, but they are no longer
kept up to temperature.
The machine remains live until the built-in mains disconnector or the mains disconnector in the
building is switched off.
Proceed as described in point 8.1 if you want to drain the tanks and clean the machine at the end of a
working day.
To Next Page
Loading...
