NOTICE!
Danger in the event of misuse!
Misuse of the W
atch Expert can lead to material
damage.
– Never clamp any objects other than watches
against the microphone.
– Only operate the device on a stable and hori-
zontal surface.
– Never set up or operate the Watch Expert in an
explosive atmosphere.
– Do not expose the device to direct sunlight or
extreme temperatures.
– Set up the device in a low-noise environment in
order to avoid distortion of the measured
values.
2.3 Labels on the device
The following labels can be found on the device.
The calibration instruction on the underside of the device shows
when the device needs to be recalibrated. To ensure reliable meas-
uring results, we recommend observing the proposed date for the
next calibration.
Electrical and electronic components in the device contain toxic
substances. The device must therefore be handed over to a munic-
ipal collection point for disposal or be disposed of by a specialist.
2.3.1 Labels on the power supply unit
The following labels can be found on the power supply unit.
Calibration instruction
Electrical and electronic compo-
nents
Safety
Labels on the device > Labels on the power supply unit
27.02.2018 Precision measuring device Watch ... 25
To Next Page
