4 Commissioning the Watch Expert
4.1
Setting the inclination of the device
The inclination of the display unit can be adjusted to the require-
ments and lighting conditions of the workplace.
Different inclinations can be set by inserting the adjustment stand
on the reverse side into the intended openings at different heights.
The stand can be rotated 180° to allow the display unit to be set up
with 6 possible inclinations.
4.2 Requirements for location
NOTICE!
An unsuitable location may distort test results!
T
o achieve precise test results, the following
requirements must be fulfilled:
– Do not position the Watch Expert and test
object in the vicinity of radiators or open win-
dows.
– Do not place the Watch Expert and test object
in direct sunlight.
– Operate the Watch Expert on a level, horizontal
surface.
– Set up the Watch Expert in a low-noise envi-
ronment.
Distortion of results
Commissioning the Watch Expert
Requirements for location
27.02.2018 Precision measuring device Watch ... 31
To Next Page
