7.6 Displaying device information
The following information can be called up using the “Info”
tab:
Fig. 39: Displaying system information
System information Additional information
Serial number Shows the serial number of the Watch Expert and the pilot microphone.
Firmware release Shows the current firmware software version:
Release display (GUI) // Measuring module // Microphone
Calibration Shows the most recent date of calibration
Saving usage data
A wide range of usage data is saved to the W
atch
Expert (e.g. operating hours, number of printouts
etc.). This data is used only for the improvement of
our products and is used solely by the Witschi
company for internal purposes. No measured
results or user data are saved to the device.
Device information display
System information
Configuring the user interface
Displaying device information
27.02.2018Precision measuring device Watch ...64
To Next Page
Loading...
