Witschi Watch Expert - Connecting Power Supply

4.3 Connecting the power supply unit
NOTICE!
Risk of material damage if an unsuitable power
supply unit is used!
Using an unsuitable or damaged power supply unit
can result in a short-circuit. This can damage the
device.
– Only use the power supply unit provided.
–
Route the power supply unit cable so that it
cannot be damaged by external influences.
Personnel:
n
Operator
1. Make sure that the local mains voltage is appropriate for the
power supply unit.
Input values
n 100 – 240 V AC
n 50 – 60 Hz
n 18 V
A
2. Insert the power supply unit adapter into the mains connec-
tion (Fig. 10/1).
3. Connect the power supply unit to the local mains supply
.
ð
The power supply is now connected.
Use of a suitable power supply unit
Checking the mains voltage
Fig. 10: Mains connection
Commissioning the Watch Expert
Connecting the power supply unit
27.02.2018Precision measuring device Watch ...32