WMF 9000S+ - Software; Ready to Operate Display

28
User Manual WMF9000 S +
Software | “Ready to operate” display
4.2 “Ready to operate” display
The display shown when “Ready to operate” depends
on the individual settings and options of the coffee
machine.
4.2.1 Beverage buttons
All beverage buttons that are ready to dispense are
illuminated.
Depending on the button layout selected, ahorizontal
swipe on the display can bring up additional beverages.
4.2.2 Function line
SteamJet pad
For heating cups.
“Warm rinse” pad
 Touch the “warm rinse” pad
A rinse of the pipes with hot water starts. The water
warms the brewing system and guarantees an
optimum coffee temperature.
Recommended after alonger brewing pause, especially
before dispensing acup of espresso.
Cup size adjustment
For selecting beverage size for the next beverage.
Cappuccino
DI_capp
Example: cappuccino button
Button layout
wOperating options
page 44
SteamJet pad
page 30
“Warm rinse” pad active/inaktive
wOperating options
page 42
Cup size adjustment
wOperating options
Page 43