WMF 9000S+ - Manual Cleaning; Clean the Mixer

74
User Manual WMF9000 S +
Care | Manual cleaning
5.4.8 Clean the mixer
Cleaning will be more frequent depending on powder
consumption.
Scalding hazard
• If the mixer hose is not firmly attached,
hot water or hot powder beverage can be
discharged inadvertently.
> Always firmly place on the mixer hose.
 Slide the operating panel upward
Daily
 Remove the mixer bowl
 Disassemble the mixer bowl into its four component
parts
 Thoroughly clean the parts under running drinking
water
When needed (weekly)
 Immerse all four parts in the cleaning solution with
50ml of WMFcleaning liquid at least for 4hours
 After 4hours, thoroughly rinse under running
drinking water again
 Allow the parts to dry completely
On re-assembly, all openings must face in the same
direction.
 Re-assemble all parts
 Replace mixer bowl
CAUTION
Follow the Safety chapter
wstarting on page 6
Instructions
wMain menu
wCare
wInstructions