WMF 9000S+ - Operating Options; Beverage Pre-selection; Cancel Beverage; Hot Water Temperature Pre-selection

46
User Manual WMF9000 S +
Software | Operating options
Beverage pre-selection
Options: • active
• inactive
Default value:
inactive
active Previously selected beverages are dispensed
without an additional button touch.
The header line displays, “Beverage
pre-selection active”.
Cancel beverage
Options: • active
• inactive
Default value:
inactive
active Beverage dispensing can be interrupted by
touching the beverage button again.
Hot water temperature pre-selection
Three hot water temperatures between 70and 95°C
can be set.
Options: • active
• inactive
Default value:
inactive
active Touching the hot water button brings up
aselection of three dispensing temperatures
in two sizes.
inactive No temperature selection is possible.
Thehot water temperature is preset.
Beverage pre-selection
DS_Getraenkevorwahl