WMF 9000S+ - System; Display and Illumination; Event Display (Message); Display Brightness

56
User Manual WMF9000 S +
Software | System
Display and illumination
Illumination
The illumination colour is set here.
Set the desired colour from the colour wheel above
the triangle. The colour can also be defined and set by
means of RGB values.
There are also the following options:
• Change colour slowly
• Standard colour change
• Quick colour change
• Off
The current setting is displayed immediately.
Illumination when “Ready to operate”
•Operationsidescolour
Event display (message)
Options: • active
• inactive
Default value:
inactive
active The illumination during amessage can be
adjusted.
Illumination for messages (event)
•Eventsidescolour
Display brightness
The brightness of the display is adjusted here.
Display and illumination
DS_Display_und_Beleuchtung
For example, “Beans empty”
message.