WMF 9000S+ - Software; S-M-L Pad; Barista Pad - Coffee Strength; Milk System Refill

29
User Manual WMF9000 S +
Software | “Ready to operate” display
S-M-L pad
For preselecting beverage sizes. The beverages must be
set up accordingly beforehand.
Barista pad - coffee strength
Display Coffee strength
without touching
2beans normal, as per setting
touch 1x
3beans 15 % stronger than
thesetting *
touch 2x
1bean 15 % weaker than
thesetting *
* Maximum quantity of ground coffee 19g per
brewing cycle
The coffee strength will be altered for the next
brewing cycle only.
Milk system refill
For automatic “Milk system refill”.
Manual insert pad
The manual insert pad is apreselection pad.
If the manual insert pad is touched prior to beverage
selection, then the display requests that the ground
coffee be loaded in the manual insert slot. Additional
preground types of coffee can be used.
Hot water button
Hot water button for dispensing hot water. Depending
on the settings, touching this hot water button brings
up aselection of three dispensing temperatures in two
beverage sizes each.
A beverage button can also be assigned for hot water.
S-M-L
wOperating options
page 45
Barista pad active/inaktive
wOperating options
page 41
Milk system refill
wOperating options
page 44
Manual insert active/inaktive
wOperating options
page 43
Hot water temperature pre-selection
wOperating options
page 46