WMF 9000S+ - Care; Enable Milk System; Foamer Rinsing; CleanLock

32
User Manual WMF9000 S +
Software | Care
Enable milk system
During cleaning, the system asks whether milk
beverages should be enabled after cleaning. If “no”
is selected, then only beverages without milk will be
available afterward.
“Enable milk system” means that milk beverages will be
available again.
Foamer rinsing
Foamer rinsing is an intermediate cleaning process for
the milk foamer.
CleanLock
 Touch CleanLock
A 15-second countdown starts.
The touch display can now be cleaned.
The touch display is activated again 15seconds after
the last time it was touched.
Instructions
Animated instructions about the available cleaning
programs and for installing and removing the mixer
and combi spout for cleaning.
Milk system refill
This function fills the milk system for dispensing cold
beverages.
 Touch Milk system rell
Drip tray cleaning
The cup table moves upward when the “Drip tray
cleaning” pad is touched. The drip tray can then be
cleaned.
Enable milk system
DS_MS_freigeben
Foamer rinsing
DS_Schaeumerspuelung
Foamer rinsing
wCare
page 68
CleanLock
DS_CleanLock
Clean the operating panel
wCare
starting on page 69
Instructions
DS_Anleitungen
Milk system rell
DS_Milchsystembefuellung
Drip tray cleaning
DS_Reinigung_Tropfschale
Clean drip tray
wCare
page 70