WMF 9000S+ - Page 90

90
User Manual WMF9000 S +
Appendix: Technical data
Nominal power rating 3.4–3.8kW 6.0–7.0kW
Power supply 220–240V
50/60Hz (1/N/PE)
380–415V
50/60Hz (3/N/PE)
On-site fuse 1x 16A 3x 16A
Illumination LED class 1
Degree of protection IP X0
Protection class
Continuous sound pressure level
(Lpa)
<70dB(A)
(3
Ambient temperature +5°C to maximum +35°C
(empty the water system in case of frost).
Maximum humidity 80 % relative humidity without condensation.
Do not use device outdoors.
Installation surface/water spray The device must be placed and levelled on
ahorizontal, sturdy, water-resistant, and
heatproof base.
The device must not be cleaned using awater
jet. The device must be installed where it is
protected against water spray. The device must
not be located on asurface that is sprayed or
cleaned with awater hose, steam jets, steam
cleaner, or similar devices.
(3
A-evaluated sound pressure level Lpa (slow) and Lpa (impulses) at operating personnel workplace is under 70dB(A) in any
working mode.