Wolf 30 - Diagnostics; STATISTICS

Faults Tab
The Faults tab shows the error code, fault name, and
odometer.
• To scroll through the errors, touch the arrow keys on
the right-hand side of the screen.
• To clear the error codes, touch and hold Clear for three
seconds.
STATISTICS
1 Touch the time on the display. The Home screen appears.
2 Touch Settings. The Settings screen appears.
3
Scroll to About on the UIM. Touch About. The About screen
appears.
4 The About screen provides information on the unit.
5 Touch and hold OK for 5 seconds. The Diagnostics menu
appears.
30" and 36" Induction Range
Diagnostics
Faults Tab (continued)
service.subzero.com
829191 REVA
35