EasyManua.ls Logo

Wolf COB - Installation - Accessories

Wolf COB
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18
3062547_201802
12 Installation-accessories
We recommend making the connection to the heating system with the following parts from the Wolf accessories range.
COBconnectionsetadjacenttothewallcomprising:
2 cross pieces, each with one connection
2 Clips
1 Corrugated stainless steel pipes 1", length 1300 mm
1 corrugated stainless steel pipe 1", length 800 mm
1 silicone grease tube
COBconnectionsetwithTSadjacenttothewallcomprising:
2 cross pieces, each with two connections
4 Clips
3 Corrugated stainless steel pipe 1", length 1300 mm
1 corrugated stainless steel pipe 1", length 800 mm
2 corrugated stainless steel pipes ¾", length 800 mm
1 silicone grease tube
1 trimming set ¾"
COBconnectionsetadjacenttothewallforaoorstanding
cylinderuptoSEM-1-750andSE-2-750comprising:
2 cross pieces, each with two connections
3 Corrugated stainless steel pipe 1", length 1300 mm
1 corrugated stainless steel pipe 1", length 800 mm
4 Clips
1 silicone grease tube 6 at packings 1"
1 Pipe bend 2 at packings 1½" EPDM
1 Pump 1 adaptor tting G1½ (fem.)
2 double nipples G 1 (male) - G 1 on G1 (male)
1 elbow with air vent
TSaccessorysetforcoldwatercomprising:
1 expansion vessel 8 l
1 cold water connection pipe to the expansion vessel
2 double nipples ¾"
1 trimming set ¾"
Pipeassemblycomprising:
1 Circulation pump (EE 0.2)
2 thermometers in ow and return
2 ball valves in ow and return
- Incl. / excl. mixer
- With manifold for 2 or 3 pipe assemblies
Forfurtheraccessories,suchasasafetyassembly1"orwallmountingbracketforpipeassembly,etc.,see"Heating
systems"pricelist
TSDHWcirculationpumpaccessorysetcomprising:
1 analogue DHW circulation pump
1 corrugated stainless steel pipe ¾"
1 trimming set ¾"
Neutralisationbox,comprising:
1 granulate ll
1 Installation accessories
(for standard fuel oil EL (sulphur content > 50 ppm),
neutralisation of the condensate is required).
Condensateliftingsystemwithapotential-freealarmoutput
comprising:
1 Condensate pump with potential-free alarm output
1 Condensate tank with cover and wall mounting bracket
1 PVC hose, 10 mm (6 m long)
1 Non-return valve
1 Condensate inlet adaptor

Table of Contents

Other manuals for Wolf COB

Related product manuals