Woodward GCP-30 Series - Page 44

Anleitung 37364A GCP-30 Packages - Genset Control
Seite 44/44 © Woodward
Interface --------------------------------------------------------------------------------------------------------
Service interface
- Version ...................................................................................................................... RS-232
- Signal level ...................................................................................................................... 5 V
Level conversion and insulation by using DPC (P/N 5417-557)
CAN bus interface isolated
- Insulation voltage ................................................................................................. 1,500 Vdc
- Version ................................................................................................................... CAN bus
- Internal line termination ................................................................................... Not available
Battery (XPD, XPQ) ------------------------------------------------------------------------------------------
- Type ............................................................................................................................. NiCd
- Durability (at operation without power supply) ............................................ approx. 5 years
- Battery field replacement ................................................................................... not possible
Housing ----------------------------------------------------------------------------------------------------------
- Type ........................................................................................... APRANORM DIN 43 700
- Dimensions (W × H × D) .................................................................... 144 × 144 × 118 mm
- Front cutout (W × H) ............................................................... 138 [+1.0] × 138 [+1.0] mm
- Wiring ................................................................ screw-plug-terminals 1.5 mm² or 2.5 mm²
- Recommended tightening torque .............................................................................. 0.5 Nm
use 60/75 °C copper wire only
use class 1 wire only or equivalent
- Weight .......................................................................................................... approx. 1,000 g
Protection -------------------------------------------------------------------------------------------------------
- Protection system ..................................................... IP42 from front for proper installation
IP54 from front with gasket (gasket: P/N 8923-1043)
IP21 from back
- Front folio ................................................................................................. insulating surface
- EMC test (CE) ................................................ tested according to applicable EN guidelines
- Listings ......................................................... CE marking; UL listing for ordinary locations
- Type approval .................................. UL/cUL listed, Ordinary Locations, File No.: 231544