Manual 26815 QuickTrip Electro-Hydraulic Trip Block Assembly
Woodward 39
Chapter 5.
Repair and Troubleshooting
To prevent possible serious personal injury, or damage to equipment,
be sure all electric power and hydraulic pressure have been removed
from the QuickTrip before beginning any maintenance or repairs.
Due to typical noise levels in turbine env
protection should be worn when working on or around the QuickTrip.
General
Woodward Products covered under Woodward Product and Service Warranty
(5-01-1205) are warranted to be free from defects in materials and workmanship, when installed and used
in the manner for which they are intended, for a period of 18 months from the date of shipment from
Woodward.
Repairs and servicing of the QuickTrip must be performed by Woodward or its authorized service facilities
Use of a cable gland or stopping plug that does not meet the hazardous area certification requirements or
thread form or thread size will invalidate the suitability for hazardous locations.
Never remove or alter the nameplate as it bears important information which may be necessary to service
or repair the unit.
Return for Repair Instruction
Should the QuickTrip need to be returned for repair:
1. Attach a tag on the unit.
2. Include the following information on the tag:
• Customer's name and address
• The name and location where the equipment is installed
• Complete Woodward part number and serial number
• Description of the failure
• Instructions as to what type of repair is to be done
Protective Packing
The following procedures are used for protective packaging of the QuickTrip, when returning for repair:
1. Install shipping plates or plugs in all hydraulic connection ports or seal with tape.
2. Wrap the QuickTrip with packaging materials that will not damage the surface of the unit.
3. Place in a double-walled packing box.
4. Secure the unit inside of the box by removing all of its degrees of freedom using straps and belts, do
not damage the unit.
5. Place at least 100 mm (4 inches) of tightly packed, industry-approved, shock-absorbing material
around the unit.
6. Secure the box with strong metal straps around the outside of the box to increase the strength of the
box.
To Next Page
Loading...
Need help?
General
