Woom ORIGINAL 3 - Setting the Position of the Brake Lever and Reach

51
EN
7�2 Setting the position of the brake lever and reach
The woom bike is delivered with a suitable standard distance based on the model.
To reduce the distance between the brake lever and the handlebar grip, turn the brake lever
adjustment bolt (1 – see illustrations) clockwise (observe the warning while doing so).
To adjust the position of the brake lever on the handlebars, loosen the clamp bolt (2 – see
illustrations) by turning it anti-clockwise and reposition the lever.
Finally, tighten the clamp bolt to the recommended torque. Make sure that the brake levers
are positioned so that your child can brake safely without undue eort and that the brake
lever is easy to reach.

WARNING
The brake lever must not touch the handlebar grip, even when squeezed hard. Turn
the adjustment bolt just far enough to ensure that the brake lever can never touch the
handlebar grip, even when applied under serious force. Never completely unscrew the
adjustment bolt from the brake lever. Failure to observe this information can result in
material damage, severe damage to health (danger to life) or death.
Adjustment bolts for woom ORIGINAL 2, woom
ORIGINAL 3 and woom ORIGINAL 3 AUTOMAGIC