wsm m9540 - Checking and Adjusting Main Gear Shifting

L3-S2
M9540Low Profile, WSM
TRANSMISSION
2. CHECKING AND ADJUSTING
[1] MAIN GEAR SHIFTING
Checking Function of Main Gear Shift (Low Profile Model)
1. Check the function of the main gear shift.
- Neutral position to 1st gear position.
- Neutral position to 2nd gear position.
- Neutral position to 3rd gear position.
- Neutral position to 4th gear position.
- Neutral position to 5th gear position.
- Neutral position to 6th gear position.
2. If shifting is not smooth, check the length of main shift rod 1 (1)
and main shift rod 2 (3). Adjust the select cable (2) so that the
lever end (4) has contact with stopper (5) when main gear shift
lever operates to 1st-2nd direction.
NOTEQ
• F12/R12 speed transmission model’s main gear shift lever
(6) is not positioned in vertically at “neutral” position.
W1011767
Length of main shift rod
2 (L1)
Initial adjustment
178 mm
7.01 in.
Length of main shift rod
1 (L2)
Factory spec.
322 mm
12.7 in.
(1) Main Shift Rod 2
(2) Select Cable
(3) Main Shift Rod 1
(4) Lever End
(5) Stopper
(6) Main Gear Shift Lever
L1 :Main Shift Rod 2 Length
L2 :Main Shift Rod 1 Length
a : Shift Lever Position at Neutral is
1.5 rad (87 °)
KiSC issued 09, 2008 A