wtw Multi 9420 - Display of Several Sensors in the Measuring Mode

Multi 9420
18 ba75964e04 04/2015
3.4.7 Display of several sensors in the measuring mode
The measured values of the connected sensors can be displayed in the follow-
ing ways:
 Clear display of all connected sensors
 Detailed display of one sensor
(e.g. incl. CMC feature with pH sensors)
With the softkey you can very easily switch between the two display types. The
suitable softkey is displayed depending on the operating situation.
2. Display further sensor data (settings) with [More].
03.04.2013 08:00
More
SenTix 940
B092500013
01.08.2013 08:00
Man. temperature: 25 °C
pH resolution 0.001
mV resolution 0.1
Buffer TEC
Calibration interval 7d
Unit for slope mV/pH
QSC: off
Software version 1.00
SenTix 940
B092500013
03.04.2013 08:00
Info
01.08.2013 08:00
Info