Wulfsberg FLEXCOMM II C-5000 User Manual

C-5000 Pilot’s Guide
Publication No. 150-041103 Page 22 of 51
Rev. C C-5000 Pilot’s Guide
Nov 2013
Enhanced System Features
Phone Patch Mode
The C-5000 can patch into the phone system using both DTMF and pulse dialing. This requires
equipment on the ground, such as a transceiver and an interface box, to connect the base station radio to
the telephone lines. This is NOT a cellular phone.
 From the HOME PAGE, select the radio and channel. Press the MENU button. The following display
page will appear.

D T M F
S
E
L
E
C
T
P
H
O N E

P U L S E
D
I
A
L
I
N
G
M O D E
 Press the UPPER SOFT KEY to select DTMF dialing, or the LOWER SOFT KEY to select pulse
dialing. In either case, the next display page will appear, and will look similar to the following. This
example shows the dialing operation being performed on radio 1, channel 1.

S E N D 1
.
.
1

H O M E #
-
_
 Input the digits you want to dial using the keypad. Alpha characters can be input by turning the
VALUE knob until the desired character is displayed, then pressing the ENTER button. Pressing the
ENTER button while a blank is displayed inputs a ½ second delay. As soon as you begin input, the
display will change slightly. The following depicts a sample entry.

S E N D 1
.
.
1

C L
R
#
-
1
2
3
4
5
6
7
8
*
9 0 #
 Press the UPPER SOFT KEY to dial the displayed data, or the LOWER SOFT KEY to erase the
displayed data.
 Press the LOWER SOFT KEY (labeled HOME) to return to the HOME PAGE.
Simulcast Operation
Simulcast Mode allows you to transmit simultaneously to two other locations that have radios tuned to
different frequencies. At the same time, the Main RT systems and Guard Receivers are able to receive
on their currently selected channels. You can establish simulcast operation as follows.
 Ensure you are on the HOME PAGE.
 Select the desired channel for radio 1.

Wulfsberg FLEXCOMM II C-5000 Specifications

General

Brand	Wulfsberg
Model	FLEXCOMM II C-5000
Category	Avionics Display
Language	English