Wulfsberg FLEXCOMM II C-5000 User Manual

C-5000 Pilot’s Guide
Publication No. 150-041103 Page 24 of 51
Rev. C C-5000 Pilot’s Guide
Nov 2013
Relay/Simulcast Operation
Relay-Simulcast mode combines the functions of Relay Mode and Simulcast Mode. It allows you to
establish an automatic radio link with two other locations that have radios tuned to different frequencies in
different frequency bands, and allows you to transmit to those same locations simultaneously. You can
establish relay/simulcast operation as follows.
 Ensure you are on the HOME PAGE.
 Select the desired channel for radio 1.
 Select the desired channel for radio 2.
 Press the MODE button until the following display page appears.
P
R
E S S
E
N
T
E
R
B
U
T
T
O N
F O
R
R
E L A
Y
/
S
I
M
U
L
C
A S T
 Press the ENTER button. The following illustrates the RELAY/SIMULCAST PAGE for radio 1 on
channel 1 and radio 2 on channel 2.
R
E L A Y / S
I
M
U
L
C
A
S
T
M O D E
1 . . 1
2
.
.
2
 Press the HOME button to exit relay/simulcast mode and return to the HOME PAGE.
Repeater Operation
Repeater mode allows the C-5000-based system to act as an airborne repeater, providing a radio link
between two ground locations that transmit and receive in the same frequency band. You can establish
repeater operation as follows.
 Ensure you are on the HOME PAGE.
 Select the desired channel for radio 1.
 Press the MODE button until the following display page appears.
P
R
E S S
E
N
T
E
R
B
U
T
T
O N
F O
R
R
E
P
E
A
T
E
R
M
O
D
E

Wulfsberg FLEXCOMM II C-5000 Specifications

General

Brand	Wulfsberg
Model	FLEXCOMM II C-5000
Category	Avionics Display
Language	English