Wulfsberg FLEXCOMM II C-5000 User Manual

C-5000 Pilot’s Guide
Publication No. 150-041103 Page 25 of 51
Rev. C C-5000 Pilot’s Guide
Nov 2013
 Press the ENTER button. The following illustrates the REPEATER PAGE for radio 1 on channel 1
and radio 2 on channel 2.
R
E P E A
T
E
R
M
O
D
E
1 . . 1
2
R
C
V
 Press the HOME button to exit repeater mode and return to the HOME PAGE.
The repeater function is limited to use with Main transceivers. Guard receivers cannot be
used.
It is possible to perform the equivelent function of a P25 airborne repeater using the RT-
5000’s MTM Guard transceivers. This requires specially programmed pairs of preset
channels used in conjunction with the C-5000’s relay mode. Consult the C-5000
operator’s manual for more detailed information on this subject.
Assuming the recommendations in the C-5000 operator’s manual have been followed,
the following procedure can be used to accomplish a P25 airborne repeater:
1. Select the repeater channel on RT #1.
2. Use the DIR button to put RT #1 into direct mode.
3. Select the repeater channel alternate on RT #2.
4. Enter into relay mode using the procedure above.
NOTE:
NOTE:

Wulfsberg FLEXCOMM II C-5000 Specifications

General

Brand	Wulfsberg
Model	FLEXCOMM II C-5000
Category	Avionics Display
Language	English