Wulfsberg FLEXCOMM II C-5000 User Manual

C-5000 Pilot’s Guide
Publication No. 150-041103 Page 46 of 51
Rev. C C-5000 Pilot’s Guide
Nov 2013
Additions to the Edit Page
There are now two edit pages, hereafter referred to as ‘primary’ and ‘secondary’. Pressing EDIT once
while on the home page brings up the primary edit page, and pressing EDIT a second time brings up the
secondary edit page. The secondary edit page contains advanced settings and parameters related to
P25 channels, as described below.
. . 1 z . 3
c
.
1
6
T
G
6
5
5 3 5
2 . 5 K
H
i
L
o
r
+
t
+
.
. . .
Channel Number field – This displays the currently selected channel, i.e. the channel you are editing.
MTM Zone field – This displays the Motorola zone for the currently selected channel number. Possible
values range 1 – 16. Note that this is only applicable for MTM channels and will display dots
otherwise. Not editable.
MTM Channel field – This displays the Motorola channel for the currently selected channel number.
Possible values range 1 – 256. Note that this is only applicable for MTM channels and will
display dots otherwise. Not editable.
Talkgroup field – This displays the talkgroup for the currently selected channel. This is only applicable
to native P25 channels and will display dots otherwise. Possible values are 1 – 65535. This is
only editable on the manual channel.
TX Deviation – This field displays the max TX deviation for the currently selected channel. Possible
values are 2.5 KHz, 4.0 KHz, 5.0 KHz, 5.6 KHz, and N/A for P25 channels. It can only be edited
on the manual channel.
2
nd
IF injection – this field displays the 2
nd
IF injection status for the currently selected channel. Possible
values are HI and LO. It can only be edited on the manual channel.
3
rd
IF injection – this field displays the 3
rd
IF injection status for the currently selected channel. Possible
values are HI and LO. It can only be edited on the manual channel.
RX Phase – this field displays the receive phase status for the currently selected channel. r+ indicates 0
degrees phase shift, and r- indicates a 180 degree phase shift.
TX Phase – this field displays the transmit phase status for the currently selected channel. t+ indicates 0
degrees phase shift, and t- indicates a 180 degree phase shift.
OTAR Flag – this field indicates whether OTAR is enabled on the current channel or not. This is only
applicable for P25 channels and can only be edited on the manual channel.
TX Dev
2
n
d
IF
OTAR
Fla
g
Channel Number
Zone/Channel
Talkgroup
3
r
d
IF
RX Phase
TX Phase

Wulfsberg FLEXCOMM II C-5000 Specifications

General

Brand	Wulfsberg
Model	FLEXCOMM II C-5000
Category	Avionics Display
Language	English